MHD Flasher N54

MHD Flasher is the first Android handheld application to bring ECU tuning and monitoring to the BMW N54 engine. The MHD Flasher reveals the immense margin of power BMW left on the table with the N54 while still retaining the sophistication of the original engine management program.

→ Easy to install

Connect any compatible Android device to your car using a standard K+Dcan cable along with an OTG USB adapter, install one of the pre-purchased MHD maps and enjoy the power and performance benefits of the MHD maps by Wedge Performance.

→ Keep an eye on the tuning

Monitor your engine behavior using a configurable gauges layout to keep an eye on any of the 50+ engine monitors like oil temp, boost pressure, actual load or individual cylinder ignition timing. Activate the logging mode to save up to 30 monitors to a standard CSV file for later analysis. Track issues by reading the error codes, and delete them once resolved.

→ Flash your ECU back to a stock anytime, as often as you need to. No ECU backup is needed.

→ Custom tuning support

As an alternative to built-in maps, many tuners can provide advanced custom mapping for those who have higher or special performance needs.

The MHD Flasher can be downloaded here: https://play.google.com/store/apps/details?id=com.mhd.flasher.n54

Main features description:

═══ Flasher module ═══

- Flash built-in maps (purchased separately), piggyback backend maps or custom user-tuned .BIN files.

- Backup up the stock ECU software, as fast as 3 seconds on most of the cars.

- Provides handy options like power limiter per gear, wastegate rattle fix or exhaust burble settings.

- Read / delete engine trouble codes.

- Reset adaptation values (Lambda, Fuel/air, Octane rating, VANOS, Throttle, and Battery).

- 2 minutes map switching; initial install time: 18 minutes on KLINE cars (2007 & Early 2008), 38 minutes on DCAN cars (2008+).

═══ Monitor module ═══

- Extensive logging values list, up to 30 values at the same time.

- Save logging session to .CSV files

- Integrated csv log viewer

- Up to 8 configurable gauges

- Automatic or manual log session start.

═══ Optional MHD maps packs ═══

- Maps by Wedge Performance

- Stage 1 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants.

- Stage 2 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants. High flow downpipes recommended.

- Ethanol mix pack. Three maps (e25, e40 and e60), FMIC+DPs recommended. Upgraded fuel pump for the e60.

Supported vehicles:

2006-2010 135i, 335i and 535i

2011-2013 335is

2009-2015 Z4 35i/is

2011-2012 1M

2008-2010 X6 35i

This racing product is for competition closed course use only.

Required hardware:

- 1 device running Android 3.2 and up, USB OTG compatible.

- 1 K+Dcan cable. See page 5 of the user manual for a recommended cable: http://www.twisted-visionz.com/mhdguide

- 1 USB OTG cable.

Price list (licenses are VIN Locked and stored by Google along your Play store account):

- Flasher module: $99

- MHD maps packs: $49 each. Requires the Flasher module.

- Monitor module: $69

- JB4 backends only flasher: $79. Upgradable for $20 to the full $99 flasher module.

- Increased boost limit (from 18 to 22 PSI) module: $49. For custom tuning purpose. Requires the Flasher module.

FAQ

Q: Can I test the connection before making a purchase?

A: Yes, simply tap the MHD Store button. The ECU connection is checked before displaying available purchases.

Q: Does my Android device need to be permanently plugged to the OBD port?

A: No. Once a flash is performed you can unplug your device.

Q: Do I need to purchase a new license each time I flash a map?

A: No, you can ref lash as many times as needed.

Q: Is a battery charger required?

A: It is highly recommended for long flashes (install, uninstall). A healthy battery will handle short flashes (map changes) fine but the use of a battery charger remains recommended.

MHD闪光是第一款Android掌上电脑应用程序，使ECU优化和监视宝马N54发动机。该MHD闪光揭示权力宝马放在桌上与N54同时仍保留原有的发动机管理程序的复杂性的巨大空间。

→易于安装

任何兼容的Android设备连接到使用标准的K + DCAN电缆与OTG USB适配器沿着你的车，安装预购的MHD地图之一，享受楔形绩效MHD地图的功耗和性能优势。

→请关注调谐

使用可配置的仪表布局，以保持眼睛的任何50岁以上的发动机显示器一样油温，增压压力，实际负载或个别缸点火正时的监控您的引擎的行为。激活记录模式，以节省高达30监视器以供以后分析的标准CSV文件。通过阅读错误代码跟踪问题，并删除它们一次解决。

→Flash中的ECU回A股随时随地，经常你需要。不需要的ECU备份。

→自定义调整的支持

作为替代内置地图，许多调谐器可以为那些谁拥有更高的或特殊性能需求提供了先进的自定义映射。

该MHD闪光可以在这里下载：https://play.google.com/store/apps/details?id=com.mhd.flasher.n54

主要功能介绍：

═══闪光模块═══

- 闪光内置地图（需单独购买），搭载后端地图或用户自调整.BIN文件。

- 备份了股票ECU软件，以最快的速度在3秒大部分汽车。

- 提供了像每档功率限制器，废气门咣修复或排气扰流设置方便的选择。

- 读/删除引擎故障码。

- 复位适配值（LAMBDA，燃油/空气，辛烷值，VANOS，油门和电池）。

- 2分钟地图切换;初始安装时：对川崎汽船汽车（2007年 - 2008年初），38分钟车DCAN（2008+）18分钟。

═══监控模块═══

- 广泛的记录值列表，同时多达30个值。

- 保存记录会话为.csv文件

- 集成CSV日志查看器

- 多达8个可配置的仪表

- 自动或手动记录会话开始。

═══可选MHD地图包═══

- 地图由楔形性能

- 第一阶段1包。八阵图：4燃油辛烷值的变种，股票/升级FMIC变种。

- 阶段2包。八阵图：4燃油辛烷值的变种，股票/升级FMIC变种。高流量落水管建议。

- 乙醇混合包。三张地图（E25，E40和E60），FMIC +移民建议。升级后的燃油泵为E60。

支持车辆：

2006 - 2010年的135i，335i的和的535i

2011 - 2013年335is

二○○九年至2015年Z4 35I /是

2011-2012 1M

2008-2010 X6 35I

该赛车产品是竞争的唯一关闭过程中使用。

硬件要求：

- 1设备运行Android 3.2及以上，USB OTG兼容。

- 1 K + DCAN电缆。对于推荐的电缆请参阅用户手册的第5页：http://www.twisted-visionz.com/mhdguide

- 1个USB OTG线。

价目表（许可VIN沿着您的Play商店帐户锁定，并存储在谷歌）：

- 闪光模块：99个$

- MHD地图包：每$ 49需要闪光模块。

- 监控模块：$ 69

- JB4后端只闪光：$ 79升级为$ 20至满$ 99个闪光模块。

- 增加升压限制（18日至22 PSI）模块：$ 49对于自定义调整的目的。需要闪光模块。

常问问题

问：我可以测试在购买前有什么联系？

答：是的，只需轻按MHD存储按钮。显示可用购买前ECU的连接进行检查。

问：我的Android设备需要永久插入到OBD端口？

答：不可以。一旦闪光灯就会执行就可以拔下您的设备。

问：我需要购买，每次我闪一张地图新的许可证？

答：不，你可以作为参考睫毛需要多次。

问：是否需要一个电池充电器？

答：这是强烈推荐长闪烁（安装，卸载）。一个健康的电池将处理短暂的闪烁（地图的变化）罚款，但使用的电池充电器仍然建议。